2026 Easy Success Nutanix NCA-6.10 Exam in First Try
Best NCA-6.10 Exam Dumps for the Preparation of Latest Exam Questions
NEW QUESTION # 25
What role does a Replication Factor of 2 or 3 play in ensuring data integrity and recovery?
- A. It limits the scope of hardware failures during recovery operations.
- B. It accelerates data transfer to remote backup sites.
- C. It ensures that multiple copies of data are available for recovery.
- D. It reduces the need for offsite backup solutions.
Answer: C
NEW QUESTION # 26
What is the minimum number of nodes required in a cluster for enabling Erasure Coding?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
The correct answer isC. 4
Erasure Coding (EC-X)in Nutanix is a data efficiency feature that replaces multiple replicas with parity data to reduce storage overhead while still protecting against failures. Theminimum node requirementfor enabling Erasure Coding is4 nodes, due to the need to distribute data and parity across multiple failure domains.
Details:
* RF2 with EC-Xrequires at least4 nodes.
* RF3 with EC-Xrequiresat least 6 or 8 nodes, depending on configuration.
Prism UI Navigation Path:
Storage > Storage Containers > Enable EC-X
Official Reference:
* Nutanix Bible - Erasure Coding Section
* Nutanix Storage Admin Guide
* Excerpt: "A minimum of 4 nodes is required in a Nutanix cluster to enable Erasure Coding (EC-X) with RF2."
NEW QUESTION # 27
An administrator wants to collect log files that have been requested by Nutanix Support.
From which Prism Element dashboard can this be accomplished?
- A. Analysis
- B. Settings
- C. Health
- D. Alerts
Answer: C
NEW QUESTION # 28
Which is the default native Linux bridge in AHV?
- A. virbro
- B. br0
- C. vs0
- D. bridge0
Answer: B
Explanation:
The correct answer isA. br0.
InAHV (Acropolis Hypervisor),br0is thedefault native Linux bridgecreated on each hypervisor host. It is used for VM traffic and external communication. AHV leveragesOpen vSwitch (OVS)to manage virtual networking, but the bridge is exposed as br0 in the host's network configuration.
Key points:
* br0connects VM virtual NICs (vNICs) to the physical network via the host's uplinks.
* It is pre-configured during Foundation or cluster deployment.
* virbr0is typical in KVM environments but isnot usedin AHV.
Official Reference:
* Nutanix AHV Networking Guide
* Nutanix KB #2027 - AHV Host Networking
* Excerpt: "AHV uses br0 as the default bridge on the host, configured by Open vSwitch for guest VM networking."
NEW QUESTION # 29
Refer to the exhibit.
What should be first selected to run a full health check?
- A. Checks
- B. Scheduled
- C. Actions
- D. Failed
Answer: A
NEW QUESTION # 30
An administrator has spent time correcting specific issues that have been identified by NCC Health Checks in Prism Element.
How can just the checks that previously did not pass be executed again to confirm they are all resolved?
- A. Run ncc health checks run_all.
- B. Select Run Check for each check worked.
- C. Select Only Failed And Warning Checks.
- D. Run LCM Pre-Upgrade to trigger NCC Checks.
Answer: C
NEW QUESTION # 31
Which Nutanix offering allows for extending an on-prem datacenter into the public cloud?
- A. Nutanix Cloud Clusters
- B. Nutanix Data Services
- C. Nutanix Kubernetes Engine
- D. Nutanix Cloud Security
Answer: A
Explanation:
Nutanix Cloud Clusters (NC2)enables extending on-premises datacenters into public cloud environments, such as AWS or Azure. This solution allows administrators to seamlessly migrate workloads, scale operations, and manage resources across hybrid cloud environments using a unified control plane.
* A. Nutanix Cloud Security:Incorrect, as this focuses on securing workloads in the cloud, not extending datacenters.
* B. Nutanix Cloud Clusters:Correct, as NC2 enables hybrid cloud functionality by extending on-prem clusters into the public cloud.
* C. Nutanix Kubernetes Engine:Incorrect, as this is used for container orchestration, not hybrid cloud extension.
* D. Nutanix Data Services:Incorrect, as this refers to storage and data management capabilities.
References:
Nutanix Cloud Clusters (NC2) Documentation.
Nutanix University: Hybrid Cloud Training.
NEW QUESTION # 32
An administrator needs to enable Self Service Restore (SSR) on a Nutanix-hosted VM.
What is required for the administrator to complete this task?
- A. Prism Central
- B. A Storage Container
- C. Nutanix Guest Tools
- D. VMWare Tools
Answer: C
Explanation:
To enableSelf Service Restore (SSR)on a Nutanix-hosted VM, the VM must haveNutanix Guest Tools (NGT)installed. NGT provides integration between the VM and the Nutanix cluster, allowing features like file-level restore, application-consistent snapshots, and SSR. Administrators can use Prism Central or Element to manage SSR after enabling NGT on the VM.
* A. A Storage Container:Incorrect, as a storage container is required for storing snapshots but is not specific to SSR.
* B. Nutanix Guest Tools:Correct, as NGT is essential for enabling SSR functionality.
* C. Prism Central:Incorrect, as Prism Central helps manage SSR but is not directly required to enable it.
* D. VMWare Tools:Incorrect, as this is specific to VMware environments and not Nutanix AHV.
References:
Nutanix Guest Tools Installation Guide.
Nutanix Administration Guide: Enabling and Managing SSR.
NEW QUESTION # 33
How many copies of the metadata are maintained within a Redundancy Factor 3 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 34
What is the purpose of Life Cycle Management (LCM)?
- A. To optimize server performance
- B. To simplify software and firmware upgrades
- C. To automate application deployment
- D. To manage network configurations
Answer: B
Explanation:
Life Cycle Management (LCM) in Nutanix is a feature designed tosimplify software and firmware upgrades across the entire cluster. LCM automates and orchestrates upgrades for components like BIOS, hypervisors, firmware, and Nutanix software, ensuring that the cluster remains up-to-date with minimal manual intervention.
* A. To optimize server performance:Incorrect, as LCM focuses on updates, not performance optimization.
* B. To manage network configurations:Incorrect, as LCM is unrelated to network configuration management.
* C. To simplify software and firmware upgrades:Correct, as LCM is specifically designed for this purpose.
* D. To automate application deployment:Incorrect, as LCM does not handle application deployment.
References:
Nutanix Life Cycle Manager Guide.
Nutanix Support KB on LCM Operations.
NEW QUESTION # 35
An administrator needs to ensure that the three VMs of an application cluster are never placed onto the same hypervisor by creating a VM- VM Anti-Affinity Policy.
What should the administrator use to complete this task?
- A. Ncli
- B. acli
- C. Prism Element
- D. Prism Central
Answer: D
Explanation:
To create a VM-VM Anti-Affinity Policy ensuring VMs are not placed on the same hypervisor,Prism Central is required. Anti-affinity policies are cluster-wide configurations managed through Prism Central's policy- based interface, enabling placement rules to distribute workloads effectively.
Steps:
* Navigate toPrism Central > Policies.
* Create a new Anti-Affinity Policy.
* Select the VMs and configure the policy to ensure separation.
References:
Nutanix Prism Central Guide - Policy Management.
Nutanix Best Practices for VM Placement Policies.
NEW QUESTION # 36
How many copies of the metadata are maintained within a Redundancy Factor 3 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
In aRedundancy Factor 3 (RF3)cluster,5 copies of the metadataare maintained to ensure data durability and cluster resiliency. RF3 provides fault tolerance against up to two simultaneous failures (e.g., node or disk failures) and requires more metadata copies to achieve this level of protection.
Other redundancy factors:
* RF2maintains 3 copies of metadata.
* RF3 requires at least 5 metadata copies to protect against additional failures.
References:
Nutanix Storage Concepts Guide - Redundancy Factors.
Nutanix Metadata Management Documentation.
NEW QUESTION # 37
Which workload type would be a good fit for NFS on Objects?
- A. Workloads that are updated frequently
- B. End user computing workloads
- C. Filesystems used for transitory or work spaces
- D. Large-scale, read heavy workloads
Answer: D
Explanation:
The correct answer isC. Large-scale, read heavy workloads.
NFS on Objectsis a Nutanix feature allowingNFS clients to interact with Nutanix Objects (S3-compatible object storage)by exposing object buckets viaNFS v3 protocol. This is ideal for workloads that require:
* Large-scale access to unstructured data
* High read concurrency
* Cost-effective storage for infrequently changed files
Best Use Case:
Backup archives, analytics workloads, image repositories, or video streaming systems withread-heavy profiles.
Clarifications:
* A (EUC workloads):Typically require fast, low-latency block storage (e.g., vDisks).
* B (Transitory FS):Better suited for file services like Nutanix Files.
* D (Frequent updates):Not ideal for object storage via NFS; performance will degrade under frequent write operations.
Official Reference:
* Nutanix Objects with NFS Gateway - Best Practices
* Nutanix Documentation Portal - Objects and NFS
* Excerpt: "NFS on Objects is best suited for large-scale, read-heavy use cases where file system semantics are needed on top of object-based storage."
NEW QUESTION # 38
Nutanix Support has asked an administrator to provide an NCC output, but there is no access to the command line.
What should the administrator do to provide the requested NCC output?
- A. Run Health Checks in the Event Dashboard.
- B. Configure email in Alert Settings and Run Health Checks in the Alert Dashboard.
- C. Run Health Checks in the Alert Dashboard and enter an email to send it to.
- D. Configure email in Alert Settings and Run Health Checks in the Health Dashboard.
Answer: D
Explanation:
When command-line access is unavailable, Nutanix administrators can use the Prism UI to generate an NCC (Nutanix Cluster Check) output. The steps are:
* Configure the email settings inAlert Settingsunder the Prism UI.
* Navigate to theHealth Dashboard, where the "Run Health Checks" option can be used.
* Provide the administrator's email address to send the health report, which includes NCC outputs.
This method enables the administrator to share diagnostic information with Nutanix Support directly via email.
* A. Run Health Checks in the Alert Dashboard and enter an email to send it to:Incorrect. Health Checks are run from the Health Dashboard, not the Alert Dashboard.
* B. Configure email in Alert Settings and Run Health Checks in the Health Dashboard:Correct.
This provides the requested NCC output when the command-line is inaccessible.
* C. Run Health Checks in the Event Dashboard:Incorrect. Health Checks are not run from the Event Dashboard.
* D. Configure email in Alert Settings and Run Health Checks in the Alert Dashboard:Incorrect, as this is not the correct location for Health Checks.
References:
Nutanix Administration Guide: Health Dashboard and NCC.
Nutanix Support Knowledge Base Article on Sending NCC Reports Without CLI Access.
NEW QUESTION # 39
An administrator needs to license a new AOS-based cluster with no add-on packages via Nutanix Cloud Platform Package Licensing.
What license type would fulfill this requirement?
- A. Nutanix Unified Storage (NUS)
- B. Nutanix Database Service (NDB)
- C. Nutanix Cloud Manager (NCM)
- D. Nutanix Cloud Infrastructure (NCI)
Answer: D
Explanation:
To license a new AOS-based cluster with no add-on packages, the appropriate license type isNutanix Cloud Infrastructure (NCI). The NCI license provides the fundamental capabilities required for Nutanix clusters, including:
* Storage and data management.
* Core virtualization features.
* Compute resources for workloads.
NCI is designed for organizations that need the essential features of the Nutanix platform without additional add-ons such as database services (NDB) or advanced storage options (NUS).
Other options:
* A. Nutanix Cloud Manager (NCM):Focuses on management capabilities for multi-cloud and operational tasks, not core infrastructure licensing.
* C. Nutanix Unified Storage (NUS):Specifically provides unified file and object storage capabilities, not relevant for a base AOS cluster.
* D. Nutanix Database Service (NDB):A dedicated licensing tier for database management features.
References:
Nutanix Licensing Overview
Nutanix Support Documentation - Licensing Models.
NEW QUESTION # 40
An administrator is building a new Windows VM on a Nutanix AHV cluster. However, when the administrator tries to install the OS, no disks are listed as available.
What does the administrator need to do to resolve the issue?
- A. Add a second disk to the VM.
- B. Mount and install the VirtIO drivers.
- C. Mount and install the Nutanix Guest Tools.
- D. Enable Turbo Mode on the VM.
Answer: B
Explanation:
The correct answer isC. Mount and install the VirtIO drivers.
When installingWindows OSon aNutanix AHV VM, the default virtual disk controller uses theVirtIO interface, which isnot natively supported by Windows installation media. As a result, during the OS installation, the virtual disk will not appear unless theVirtIO drivers are manually provided.
Required Steps:
* Attach theVirtIO ISOto the VM.
* During the Windows installation, click"Load Driver".
* Browse to the mountedVirtIO ISOand select the appropriate storage driver.
* Once loaded, the installer will detect the virtual disk.
Clarifications:
* A (Add a second disk):Irrelevant; the issue is driver recognition, not disk quantity.
* B (Enable Turbo Mode):Related to performance, not disk detection.
* D (Install Nutanix Guest Tools):Doneafter OS installation, not before or during.
Prism UI Navigation Path:
VM > Edit > CD-ROM > Mount ISO # Select VirtIO ISO
Official Reference:
* Nutanix AHV Administration Guide - Creating Windows VMs
* Nutanix KB #5967 - AHV: Windows Installation on VirtIO
* Excerpt: "If the disk is not detected during Windows installation, the VirtIO ISO must be mounted and the appropriate storage controller driver manually installed."
NEW QUESTION # 41
A Veeam Backup appliance, which uses iSCSI, must be deployed into an AHV-based cluster.
What must be configured to allow Veeam to connect to the Nutanix cluster?
- A. Prism Central
- B. Data Services IP
- C. Network Segmentation
- D. Nutanix Objects
Answer: B
NEW QUESTION # 42
......
NCA-6.10 Study Material, Preparation Guide and PDF Download: https://dumpscertify.torrentexam.com/NCA-6.10-exam-latest-torrent.html
