TorrentExam 300-815 dumps & CCNP Collaboration Sure Practice with 243 Questions [Q80-Q99]

Share

TorrentExam 300-815 dumps & CCNP Collaboration Sure Practice with 243 Questions

New 300-815 Exam Questions| Real 300-815 Dumps


Cisco 300-815 exam consists of 60-70 multiple-choice and multiple-answer questions that are designed to test your knowledge and skills in implementing and troubleshooting advanced call control and mobility services. 300-815 exam duration is 90 minutes, and candidates must achieve a score of at least 825 out of 1000 points to pass. 300-815 exam can be taken in English and Japanese languages and is available globally through Pearson VUE testing centers.


Cisco 300-815 certification exam is an excellent opportunity for IT professionals to showcase their expertise in implementing advanced call control and mobility services using Cisco technologies. Earning this certification can help candidates enhance their career prospects and demonstrate their commitment to continuous learning and professional development.

 

NEW QUESTION # 80
ABC company has decided to implement hunt groups to help distribute calls between members.
In order to implement this, administrator must configure hunt list, hunt group, and line groups on Cisco UCM. Which distribution algorithms should the administrator implement?

  • A. Top Down, Circular, Broadcast
  • B. Top Down, Round Robin, Distribute
  • C. Sequantial, Circular, Broadcast
  • D. Top Down, Round Robin, Broadcast

Answer: A


NEW QUESTION # 81
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern "123"?

  • A. 12X (urgent priority set)
  • B. 12!
  • C. 1XX (urgent Priority Set)
  • D. 12[2-5]

Answer: A


NEW QUESTION # 82
A Collaboration engineer is implementing call processing capabilities on the Cisco UCM and needs to configure Call Queuing to place callers in a queue until hunt members are available to answer them. Which action must be completed before this feature can be configured?

  • A. Configure Hunt Pilot Queuing.
  • B. Configure Music On Hold.
  • C. Configure announcements.
  • D. Service the Cisco IP Voice Media Streaming (IPVMS) application.

Answer: A


NEW QUESTION # 83
Which two statements about Cisco Unified Mobility are true? (Choose two.)

  • A. Mobility is used to support mobile phones in Cisco Unified Communications
  • B. Mobility just be enabled per user
  • C. Mobile use of Cisco Jabber requires mobility
  • D. Mobility is enabled by default
  • E. Single number reach is a feature of mobility

Answer: B,E


NEW QUESTION # 84
An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is learned through ILS. Which service parameter is used to adjust this limit?

  • A. ILS Max Number of Learned Objects in Database
  • B. ILS Active Learned Object Upper Limit
  • C. Global Data Service Parameter Limit
  • D. Imported Dial Plan Replication Database Object Lower Limit

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1SU1/systemCo nfig/cucm_b_system-configuration-guide-1251su1/cucm_b_system-configuration-guide-
1251su1_restructured_chapter_0100011.html#CUCM_TK_I7C708C2_00


NEW QUESTION # 85
Refer to the exhibit.

An administrator has configured a SIP trunk between two Cisco UCM clusters. For calls that should use the trunk, the calls fail with a fast busy. The administrator checks the Cisco CallManager SDL traces and found that the cluster to which the calling device is registered never sends an INVITE to the destination cluster. The administrator also verifies that all nodes from both clusters are powered on, and the CallManager service is running. How is this issue resolved?

  • A. The administrator needs to enable OPTIONS pings on the SIP trunks for both clusters.
  • B. The administrator must associate the route pattern with a calling search space the device can dial.
  • C. The administrator must allow connectivity so that TCP connections do not fail between the nodes.
  • D. The administrator needs to disable OPTIONS pings on the SIP trunks for both clusters.

Answer: C


NEW QUESTION # 86
Refer to the exhibit.

Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user
+1613-555-1234 dials the number?

  • A. calling number 613-555-1234 and numbering type "subscriber"
  • B. calling number 011-1-613-555-1234 and numbering type "subscriber"
  • C. calling number 011613-555-1234 and numbering type "international"
  • D. calling number 613-555-1234 and numbering type "national"

Answer: D


NEW QUESTION # 87
Refer to the exhibit. A collaboration engineer is troubleshooting an issue where a user of a Cisco UCM IP phone reports failed calls when trying to dial out to the PSTN. Which action resolves the issue?

  • A. Deselect "Block this pattern" on the "Route Option" setting of the route pattern.
  • B. Assign a calling search space to the line or the device that has access to the route pattern.
  • C. Instruct the user to not dial a "1" before their local area code.
  • D. Select the "Urgent Priority" setting on the route pattern.

Answer: B


NEW QUESTION # 88
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)

  • A. Destination Port in SIP Trunk Security Profile configuration
  • B. Incoming Port in SIP Information section of the SIP Trunk configuration.
  • C. Incoming Port in Security Information of the SIP Profile configuration.
  • D. Incoming Port in SIP Trunk Security Profile configuration
  • E. Destination Port in SIP Information section of the SIP Trunk configuration

Answer: D,E

Explanation:
Incoming Port of a SIP Trunk Security Profile is Mandatory.
Destination Port is configured to the right of the Destination Address in the SIP Information portion of the SIP Trunk Configuration.


NEW QUESTION # 89
Refer to the exhibit.

Refer to the exhibit. How many maximum hops does an ILS update traverse?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A


NEW QUESTION # 90
Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is one-way audio or no audio. You determine that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally.
What are two possible solutions? (Choose two.)

  • A. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 16384-32767
  • B. Ask the firewall administrator to change the ports to TCP.
  • C. Go to System Parameters in Cisco Unified Communications Manager and change the range of media ports to 20000-22000.
  • D. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 20000-22000.
  • E. Ask the firewall administrator to change the range of UDP ports to 16384-32767.

Answer: A,E


NEW QUESTION # 91
The administrator of ABC company is troubleshooting a one-way audio issue for a call that uses H.323 protocol (slow-start mode). The administrator requests that you provide the IP and port information of the Real- Time Transport Protocol traffic that had the one-way audio call.
You gather the H.225 and H.245 messages for one of the one-way audio calls. Where can you find the RTP IP and port information for both sides? (Note: This call flow has not invoked any media resources like MTP or transcoders).

  • A. H.245 Terminal Capability Set
  • B. H.225 Connect
  • C. H.245 Open Logical Channel Ack
  • D. H.245 Open Logical Channel

Answer: D

Explanation:
Reference:
http://ccievoicehopeful.blogspot.com/2012/09/h323-notes.html


NEW QUESTION # 92
A Cisco UCM-based solution uses URI-based calling for Cisco Jabber clients. The solution has several clusters in different locations. The solution being configured must have a secure method o* exchanging addresses between the clusters. Which action ensures that a configuration complies with the requirements?

  • A. Select the TLS option on the SIP trunk between the clusters.
  • B. Assign a self-signed certificate to the ILS service trunk.
  • C. Exchange Tomcat certificates
  • D. Apply a secure security profile to the trunk between the clusters.

Answer: A


NEW QUESTION # 93
A user reports when they press the services key they do not receive a user ID and password prompt to assign the phone extension. Which action resolves the issue?

  • A. Subscribe the phone to the Cisco Extension Mobility service.
  • B. Create the default device profiles for all phone models that are used.
  • C. Assign the extension as a mobile extension.
  • D. Create the end user and associate it to the device profile.

Answer: A


NEW QUESTION # 94
Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is one-way audio or no audio. You determine that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally. What are two possible solutions? (Choose two.)

  • A. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 16384-32767
  • B. Ask the firewall administrator to change the ports to TCP.
  • C. Go to System Parameters in Cisco Unified Communications Manager and change the range of media ports to 20000-22000.
  • D. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 20000-22000.
  • E. Ask the firewall administrator to change the range of UDP ports to 16384-32767.

Answer: A,E


NEW QUESTION # 95
When the services key is pressed Cisco Extension Mobility does not show up. What is the cause of the issue?

  • A. Cisco Extension Mobility is not enabled in the Phone Configuration Window (Device > Phone)
  • B. The phone is not subscribed to Cisco Extension Mobility Service.
  • C. Cisco Extension Mobility Service is not running.
  • D. The URL configured for Cisco Extension Mobility is not correct.

Answer: B

Explanation:
Section: Mobility


NEW QUESTION # 96
An administrator troubleshoots call failure in a new deployment and finds that the SIP INVITE messages sent to the service provider contain a diversion header with the user's 4-digit directory number. These 4-digit directory numbers range from 1000 to 9999. The service provider is rejecting the calls because it requires that the diversion header contain 10 digits. Which command on the Cisco Unified Border Element resolves this issue for all users?
A)

B)


  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: B


NEW QUESTION # 97
Refer to the exhibit.

Refer to the exhibit. An engineer is trying to set up a new deployment using the SIP provider with TCP for signaling. After troubleshooting, the customer notices that the matching incoming dial peer and outgoing dial peer did not generate the INVITE to the SIP provider. Why is the call failing?

  • A. The ITSP is not sending the ACK.
  • B. The ITSP is sending CLOSE state.
  • C. The ITSP is sending FIN.
  • D. The ITSP is not answering the SYN.

Answer: D


NEW QUESTION # 98
Refer to the exhibit.

The Cisco Unified Border Element receives an INVITE matching inbound dial peer 5002. The outbound dial peer supports only iLBC. and a Local Transcoding Interface is allocated. Based on the configuration and SDP from the INVITE message, which codec is chosen by Cisco Unified Border Element for the inbound call leg?

  • A. G.711 U-law
  • B. G.729br8
  • C. G.729r8
  • D. G.711 A-law

Answer: C


NEW QUESTION # 99
......


Cisco 300-815 exam covers several topics related to advanced call control and mobility services. Candidates will be tested on their knowledge of the Cisco UCM call routing and signaling protocols, dial plan implementation, and call admission control. They will also be evaluated on their ability to configure and troubleshoot Cisco mobility features such as device mobility, extension mobility, and mobile connect.

 

300-815 Braindumps – 300-815 Questions to Get Better Grades: https://dumpscertify.torrentexam.com/300-815-exam-latest-torrent.html