Updated Apr-2026 Workday-Pro-HCM-Reporting Free Exam Files Downloaded Instantly
Practice Exams and Training Solutions for Certifications
Workday Workday-Pro-HCM-Reporting Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 12
You are configuring a data column on a composite report. You would like to map a subreport prompt to a value in a prompt set, but the prompt is not appearing on the Map Sub Report Prompts grid in the column configuration options.
What could be causing this?
- A. You already set a default value for the prompt on the subreport.
- B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
- C. You do not have access to the domain securing the report prompt.
- D. You did not select Use Value From Prompt Set as the default prompt value in the subreport.
Answer: B
Explanation:
In Workday, when you configure composite reports, you can map subreport prompts to prompt sets for greater flexibility. However, if the Do Not Prompt at Runtime checkbox is selected on the subreport prompt, the prompt will not be exposed in the Map Sub Report Prompts grid. This is because Workday interprets the prompt as suppressed and therefore not available for mapping at runtime.
From the Workday binder: "Prompts suppressed with the Do Not Prompt at Runtime option will not appear in the Map Sub Report Prompts grid in composite report configuration. To map a subreport prompt, ensure the prompt is enabled at runtime." Other options do not directly cause this issue: default values on prompts do not suppress them, security issues would block data but not hide the prompt mapping, and prompt set configuration errors affect defaulting but not visibility.
Thus, the correct answer is B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
NEW QUESTION # 13
A composite report sorts output based on the last column in ascending order. You want the sort to be based on the second to last column in descending order.
Where do you make this change?
- A. Report settings
- B. Dynamic data row
- C. Second to last column
- D. Combine data row
Answer: C
Explanation:
In Workday composite reports, sorting behavior is controlled at the column level, not globally. Each column in a composite report can be configured with its own sort order (ascending or descending). When a composite report is sorting by the last column, it means that column has an active sort configuration applied.
To change the sort to the second to last column and set it to descending, you must edit that specific column's configuration and adjust the sort settings accordingly. Workday evaluates column sorting in sequence, and the active column-level sort determines the output order.
From the Workday HCM Reporting documentation:
"Composite reports support column-based sorting. Sorting is defined within the column configuration and determines the order in which results display."
"To change sort behavior, update the sort settings on the appropriate column." The other options are incorrect because dynamic data rows control layout flexibility, combine data rows merge subreport results, and report settings manage prompts and general options-not sorting logic.
NEW QUESTION # 14
You are creating a custom report to calculate the monthly bonus for each worker in the sales department. The bonus is calculated as 10% of the total sales for the month. What calculated field function would return the monthly bonus for each worker?
- A. Lookup Related Value
- B. Arithmetic Calculation
- C. Evaluate Expression
- D. Sum Related Instances
Answer: B
Explanation:
The Arithmetic Calculation function is designed for mathematical operations such as addition, subtraction, multiplication, and division. In this scenario, the bonus equals 10% of monthly sales, so you need to multiply the sales field by 0.10.
The Workday documentation highlights: "Arithmetic Calculation - Creates a numeric field using mathematical operations performed on existing fields." . This makes it the ideal choice for payroll- and incentive-related calculations.
Other options are less relevant: Evaluate Expression is for logical or Boolean conditions, Lookup Related Value is for retrieving fields from related objects (not calculations), and Sum Related Instances aggregates multiple rows of data but does not directly calculate percentages.
Thus, the arithmetic calculation provides a straightforward and efficient way to compute bonuses dynamically in the report.
NEW QUESTION # 15
You are configuring a data column on a composite report. You would like to map a subreport prompt to a value in a prompt set, but the prompt is not appearing on the Map Sub Report Prompts grid in the column configuration options.
What could be causing this?
- A. You already set a default value for the prompt on the subreport.
- B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
- C. You do not have access to the domain securing the report prompt.
- D. You did not select Use Value From Prompt Set as the default prompt value in the subreport.
Answer: B
Explanation:
In Workday, when you configure composite reports, you can map subreport prompts to prompt sets for greater flexibility. However, if the Do Not Prompt at Runtime checkbox is selected on the subreport prompt, the prompt will not be exposed in the Map Sub Report Prompts grid. This is because Workday interprets the prompt as suppressed and therefore not available for mapping at runtime.
From the Workday binder: "Prompts suppressed with the Do Not Prompt at Runtime option will not appear in the Map Sub Report Prompts grid in composite report configuration. To map a subreport prompt, ensure the prompt is enabled at runtime." Other options do not directly cause this issue: default values on prompts do not suppress them, security issues would block data but not hide the prompt mapping, and prompt set configuration errors affect defaulting but not visibility.
Thus, the correct answer is B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
NEW QUESTION # 16
Where can you view a list of your scheduled reports?
- A. Scheduled Future Processes
- B. Scheduled Future Reports
- C. View All Occurrences for a Schedule
- D. Scheduled Distributions Report
Answer: A
Explanation:
Workday uses the Scheduled Future Processes report to display all processes that are scheduled to run in the future, including scheduled custom reports, standard reports, and other background jobs. This report provides visibility into recurrence patterns, next run dates, owners, and process types, making it the primary place to confirm scheduled report execution.
From the Workday HCM Reporting documentation:
"The Scheduled Future Processes report allows users to view all scheduled processes, including reports, along with their run frequency and next execution date."
"Use Scheduled Future Processes to validate that a report is still scheduled and confirm future run instances." The other options are incorrect because:
"Scheduled Future Reports" is not a delivered Workday task.
"Scheduled Distributions Report" is not used to view report schedules.
"View All Occurrences for a Schedule" is accessed only after selecting a specific schedule and does not provide a consolidated list.
Therefore, the correct answer is D. Scheduled Future Processes.
NEW QUESTION # 17
An HR analyst has many visualizations in different discovery boards that use the Workers for HCM Reporting data source on the Worker primary business object. The analyst wants to drill into one of the visualizations by Worker. Upon drilling, the analyst notices that Worker is not a listed Drill By field option. They want to drill by Worker without editing the Drill By list of the other visualizations.
How would the analyst configure this?
- A. Create a control from a sheet filter and filter the data by Worker from the Control Panel.
- B. Override the Drill By field list and add Worker in the Configuration Panel for this visualization.
- C. Drag and drop the Worker field in one of the dimensions of this visualization in the Builder Panel.
- D. Add Worker as a Drill By field from the Maintain Field Lists for Discovery Boards report.
Answer: B
Explanation:
In Discovery Boards, drill behavior is defined in the Drill By field list. To add Worker as a drillable option in just one visualization, the analyst can override the Drill By list in the Configuration Panel of that visualization. This allows Worker to appear as a drill dimension without altering the defaults applied across other visualizations.
From the Workday documentation: "You can override Drill By field lists in the visualization configuration panel. This enables drill customization on a per-visualization basis without impacting other discovery boards." The other options are less appropriate: Maintain Field Lists changes the default for all boards; adding Worker as a dimension affects grouping, not drilling; and sheet filter controls allow filtering but do not add drill options.
Thus, the correct choice is D. Override the Drill By field list and add Worker in the Configuration Panel for this visualization.
NEW QUESTION # 18
A composite report sorts output based on the last column in ascending order. You want the sort to be based on the second to last column in descending order.
How do you make this change?
- A. Update the report settings.
- B. Create a dynamic data row.
- C. Edit the combine data row.
- D. Edit the second to last column.
Answer: D
Explanation:
Sorting in composite reports is determined at the column level, not at the combine row or general report settings. If the output currently sorts by the last column, that is because the sort option was applied there. To change the sorting behavior to the second-to-last column and in descending order, you must edit that specific column's configuration.
From the Workday binder: "Composite reports allow sorting based on columns. To change sorting behavior, adjust the column configuration, specifying ascending or descending order." The other options are incorrect: "combine data row" merges subreport outputs, not sorting; "dynamic data row" generates flexible rows but doesn't control sorting; and "report settings" manage prompts and scheduling, not output order.
Therefore, the correct action is B. Edit the second to last column.
NEW QUESTION # 19
You are creating a custom report that displays employee salary amounts. You need to ensure that compensation analysts have the appropriate security permissions to view this information for all employees.
How do you confirm the security group's access to salary amounts?
- A. Review the domain security policy on the report's data source.
- B. Review the domain security policy on the salary amount report field.
- C. Run the Activate Security Policy Pending Changes task.
- D. Assign individuals to the compensation analyst security group.
Answer: B
Explanation:
In Workday, access to sensitive data such as salary amounts is controlled at the report field level through security domains. Even if a user has access to the report itself or the data source, they will not be able to see secured fields unless their security group has permission to the domain that specifically secures that field.
The Workday HCM Reporting documentation explains that report fields are securable items and are governed by domain security policies. To confirm whether compensation analysts can view salary amounts for all employees, you must review the domain security policy associated with the Salary Amount report field and verify that the appropriate security group has View (or higher) access.
From the Workday documentation:
"Security access to report fields is controlled by domain security policies. Users must have access to the domain that secures a report field in order to view its data."
"Even when users have access to a report or data source, secured fields will not display unless domain permissions are granted." Running Activate Security Policy Pending Changes applies changes but does not confirm access. Assigning users to a security group does not ensure that the group has the correct domain permissions. Reviewing only the data source security is insufficient because salary visibility is controlled at the field/domain level.
NEW QUESTION # 20
You want the ability to view every summarization in the composite report by Location.
What do you do?
- A. Include Location as a Detail Data field in one of the subreports.
- B. Include Location as a drillable field in one of the subreports.
- C. Include Location as a Detail Data field in all the subreports.
- D. Include Location as a drillable field in all the subreports.
Answer: C
Explanation:
Composite reports combine multiple subreports, and their summarizations depend on the fields configured in the subreports themselves. To enable consistent grouping and summarization across the entire composite report, the Location field must be included as a Detail Data field in all the subreports. This ensures that each subreport provides the Location context required for composite-level summarization.
From the Workday binder: "Composite reports aggregate results from multiple subreports. To summarize or drill consistently on a specific field, that field must exist as a Detail Data field in all subreports included in the composite." If Location is only included in one subreport, summarizations in the other subreports would not align, and Location-based grouping would fail. Similarly, making Location drillable only affects drill-down options, not summary-level grouping across the composite.
Thus, the correct answer is A. Include Location as a Detail Data field in all the subreports.
NEW QUESTION # 21
The Chief Learning Officer wants you to build a report that lists all current learning content and any information you have relating to ratings and popularity.
How should you find the relevant fields and data sources that are available for you to create this report?
- A. Run the Workday Standard Reports report
- B. View the Learning dashboard
- C. Access the View Custom Report task
- D. Run the Business Object Details report
Answer: D
Explanation:
To locate the correct fields and data sources for a custom report, Workday provides the Business Object Details report. This report displays all available fields, relationships, and related business objects that can be included in reporting. It ensures report writers can confirm which fields (e.g., Learning Content, Ratings, Popularity) are accessible for use.
From the Workday Reporting documentation:
"The report data source provides the view into the primary business object. This object gives you access to class report fields as well as links to related business objects."
"The Business Object Details report is used to view which fields are available for reporting." Therefore, the correct answer is B. Run the Business Object Details report.
NEW QUESTION # 22
You have created a composite report and are trying to add a matrix report as a subreport. However, when trying to configure a Data column, the matrix report is not available to select in the Sub Report Name field.
What can you check to identify the cause of this issue?
- A. Check that the summarization fields in the matrix report also match the selections in the Field to Aggregate field in the Data column settings.
- B. Check that the prompt defaults in the matrix report align with the prompt defaults defined in the composite report's Report Settings.
- C. Check that the configurations on the Filter Data in Sub Report grid also exist in the Filter tab of the matrix report definition.
- D. Check that every field in the composite report's set of fields that are enabled for filtering and grouping also exists as a group-by field in the matrix report.
Answer: D
Explanation:
For a matrix report to be used as a subreport in a composite report, the group-by fields in the matrix report must align with the fields enabled for filtering and grouping in the composite report. If this alignment does not exist, Workday does not allow the matrix report to appear as a valid subreport option in the Sub Report Name dropdown.
From the Workday binder: "To include a matrix report as a subreport in a composite, the group-by fields of the matrix must match the fields enabled for grouping in the composite report. If these do not match, the matrix will not appear in the Sub Report Name selection." Other factors such as prompt defaults or filter settings may impact usability, but they do not prevent the matrix report from being selectable. The key dependency is the field alignment between the composite and the matrix group-by fields.
Therefore, the correct answer is A. Check that every field in the composite report's set of fields that are enabled for filtering and grouping also exists as a group-by field in the matrix report.
NEW QUESTION # 23
You are building a report that shows employee performance ratings and their associated performance review details. The report uses the Performance Review primary business object. Using a calculated field, what formula should you use to retrieve the employee's job title from the related Worker business object?
- A. Lookup Related Value
- B. Lookup Range Band
- C. Aggregate Related Instances
- D. Evaluate Expression Band
Answer: A
Explanation:
The correct choice is Lookup Related Value, because this function allows you to retrieve a field from a related business object that is not directly stored on your primary object. In this scenario, the primary business object is Performance Review, which holds performance-related data but not job-related data such as Job Title. Since Job Title resides on the Worker business object, you need to link from Performance Review to Worker and then retrieve Job Title.
The Workday reporting guide explains: "Lookup Related Value - Returns a field from a related business object. Use this to bring data from associated objects into a report when the field is not directly available on the primary object." . This ensures the Performance Review data can be combined with Job Title for meaningful insights.
By contrast, Aggregate Related Instances is used to roll up multiple related values, Range Band applies thresholds, and Evaluate Expression Band is used for conditional ranges, not cross-object retrieval.
NEW QUESTION # 24
You are viewing a Report Performance Log and notice the Top Level Filter Time is high.
How should you edit the report definition to improve this?
- A. Use a different data source
- B. Use built-in data source prompts instead of filters
- C. Use calculated fields instead of filters
- D. Use subfilters instead of filters
Answer: B
Explanation:
Workday's Report Performance Log highlights processing time contributors such as "Top Level Filter Time." If this is high, the best practice is to replace report filters with built-in data source prompts, since prompts restrict data earlier in processing, improving performance.
From the Workday Reporting documentation:
"To improve report performance, leverage built-in data source prompts instead of filters whenever possible. Prompts reduce the data set retrieved before filters are applied, minimizing filter processing time." Therefore, the correct answer is B. Use built-in data source prompts instead of filters.
NEW QUESTION # 25
A Hire event has an Effective Date of 09/02/2023.
What would be the Record Date of the Hire event on the Trended Workers object?
- A. 9/2/2023
- B. 10/31/2023
- C. 9/1/2023
- D. 9/30/2023
Answer: D
Explanation:
In Workday trending reports, the Record Date for a transaction is not always the same as the event's Effective Date. Instead, trending data is captured based on the periodicity of the trended workers configuration, most commonly set to the end of each month. For Hire events, the Effective Date is when the change takes effect in the system, but the trended data is stored using the month-end Record Date.
From the Workday binder: "Trended Workers captures snapshots of worker data at periodic intervals (e.g., monthly, quarterly). A transaction such as a hire or termination is recorded in trending as of the last day of the period in which the effective date occurs." In this scenario, the Hire Effective Date of 09/02/2023 falls in September. The Record Date is therefore the last day of September, 09/30/2023, not the effective date itself.
Thus, the correct answer is C. 9/30/2023.
NEW QUESTION # 26
You need a calculated field that returns whether or not the initiator for a Manage Goals event is the worker's manager.
- A. Lookup Related Value
- B. True/False Condition
- C. Evaluate Expression
- D. Evaluate Expression Band
Answer: B
Explanation:
The True/False Condition calculated field is used to return Boolean results (True or False) based on defined criteria. In this scenario, the field must evaluate whether the event initiator equals the worker's manager. By setting that condition, the calculated field will return True if the initiator is the manager and False otherwise.
From Workday Reporting documentation:
"True/False Condition - Creates a Boolean field that evaluates a condition and returns True or False depending on whether the condition is met." Thus, the correct answer is B. True/False Condition.
NEW QUESTION # 27
You are configuring a waterfall visualization showing employee movement. To properly display the information, you need the Termination Count field to return as a negative number.
- A. Format Number
- B. Numeric Constant
- C. Arithmetic Calculation
- D. Extract Single Instance
Answer: C
Explanation:
When creating custom reports and visualizations, calculated fields can transform values. To change positive counts into negative values (such as terminations in a waterfall chart), you use the Arithmetic Calculation function. This function allows you to perform math operations (addition, subtraction, multiplication, division) on numeric fields. By multiplying the Termination Count by -1, the result displays as a negative number.
From Workday Reporting documentation:
"Arithmetic Calculation - Performs mathematical operations on numeric fields. You can create new numeric outputs such as percentages, ratios, or negatives by applying arithmetic logic." Thus, the correct answer is C. Arithmetic Calculation.
NEW QUESTION # 28
......
Q&As with Explanations Verified & Correct Answers: https://dumpscertify.torrentexam.com/Workday-Pro-HCM-Reporting-exam-latest-torrent.html
