LEED-AP-ID-C Dumps By Pros - 1st Attempt Guaranteed Success
100% Guarantee Download LEED-AP-ID-C Exam Dumps PDF Q&A
NEW QUESTION # 60
A Client is fitting out a building with area 20,500 ft2 (1 904.5 m2) and wishes to pursue the Energy and Atmosphere Credit, Enhanced Commissioning. Who may be appointed as the Commissioning Authority (CxA) for the project?
- A. An employee of the architecture or engineering firm but not a member of the design team
- B. A subcontractor of the general contractor or construction manager but not a member of the construction team
- C. An employee or subcontractor of the general contractor or construction manager and a member of the construction team
- D. A sub-consultant to the architecture or engineering firm but not a member of the design team
Answer: D
Explanation:
For the Energy and Atmosphere Credit, Enhanced Commissioning, the Commissioning Authority (CxA) plays a crucial role in overseeing the commissioning process. The CxA must be independent of the project's design and construction team to maintain objectivity. An employee of the architecture or engineering firm involved in the project could potentially have a conflict of interest. Similarly, a member of the construction team could also have biases that might affect the commissioning process's integrity. Therefore, a sub-consultant to the architecture or engineering firm, who is not part of the project's design team, is an appropriate choice for the CxA role, ensuring independence and impartiality in the commissioning process.References:
* LEED v4 for Interior Design and Construction Reference Guide, particularly the section on Energy and Atmosphere Credit, Enhanced Commissioning
NEW QUESTION # 61
The site of a new open-plan office building is located near a highway. The acoustic consultant is investigating the possibility of using sound masking system to cover the noise impact from the busy road. If sound masking is found to be a feasible option, the noise design of the project can have a maximum limit up to
- A. 70 dBA
- B. 48 dBA
- C. 62 dBA
- D. 36 dBA
Answer: B
Explanation:
According to the LEED v4 guidelines for Interior Design and Construction, sound masking systems are used to provide an acoustically superior environment for occupants. The design levels for these systems should not exceed 48 dBA to ensure that loudspeaker coverage provides uniformity of ±2 dBA and that speech spectra are effectively masked1.
References:
* LEED v4 for Interior Design and Construction guidelines on acoustic performance and sound masking systems1.
NEW QUESTION # 62
A tenant space includes an open office floor plan of 100 workstations and 10 enclosed offices where each workspace is designed for individual use. Based on the requirements of Indoor Environmental Quality Credit, Interior Lighting, what is the minimum number of occupants requiring individual controls to achieve one point?
- A. 99 occupants
- B. 100 occupants
- C. 90 occupants
- D. 81 occupants
Answer: C
Explanation:
For LEED Indoor Environmental Quality Credit concerning Interior Lighting, Option 1, the requirement is for
90% of building occupants to have individual lighting controls. Given that the tenant space includes 100 workstations and 10 enclosed offices intended for individual use, this means that a total of 110 workspaces require lighting control. To achieve one point, at least 90% of these occupants must have control over the lighting in their space. Therefore, the minimum number of occupants that would need individual lightingcontrols is 90% of 110, which calculates to 99 occupants (rounded down). However, as individual controls cannot be split between occupants, the actual minimum number would be 99 occupants. Option B is the closest answer to 99 without going under the required percentage.
References:Explanation of the requirements for individual lighting controls to meet the Interior Lighting Credit under Indoor Environmental Quality, indicating that 90% of building occupants must have task lighting
.
NEW QUESTION # 63
Which systems must be commissioned to earn Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification?
- A. Fire suppression
- B. Irrigation controls
- C. Building Envelope
- D. Daylighting controls
Answer: C
Explanation:
The Fundamental Commissioning and Verification prerequisite requires commissioning of the building's mechanical, electrical, plumbing, and renewable energy systems and assemblies. While the building envelope is not typically commissioned, it must be included in the owner's project requirements (OPR) and basis of design (BOD), and its design must be reviewed.
References: The LEED v4.1 reference guide for Interior Design and Construction outlines the scope of commissioning process activities, which includes the requirement for exterior enclosures to be limited to inclusion in the OPR and BOD, as well as the review of the OPR, BOD, and project design12.
NEW QUESTION # 64
A mechanical engineer needs to identify spaces that are considered densely occupied according to LEED in order to document
- A. Indoor Environmental Quality Credit, Indoor Air Quality Assessment, Option 2. Air Testing
- B. Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies, Option 2 C. Carbon Dioxide Monitoring
- C. Indoor Environmental Quality Credit, Thermal Comfort, Control Requirements
- D. Indoor Environmental Quality Credit, Interior Lighting, Option 2
Answer: B
Explanation:
In LEED, densely occupied spaces are relevant for assessing indoor environmental quality strategies, especially concerning carbon dioxide monitoring. High-density occupancy can lead to increased levels of CO2, which may affect occupants' comfort and health. Identifying densely occupied spaces is a crucial step in designing appropriate ventilation and air quality monitoring systems, and the carbon dioxide monitoring strategy aims to maintain the CO2 levels within acceptable limits in such spaces.
References:Reference to 'densely occupied space' within the context of Enhanced Indoor Air Quality Strategies and the option for Carbon Dioxide Monitoring, highlighting the connection between occupancy density and air quality .
NEW QUESTION # 65
What percentage of occupants require individual control of thermal systems under Indoor Environmental Quality, Thermal Comfort?
- A. 50%
- B. 25%
- C. 75%
- D. 90%
Answer: A
Explanation:
The LEED requirements for Indoor Environmental Quality, Thermal Comfort, necessitate that at least 50% of individual occupant spaces have individual thermal comfort controls. This allows occupants to adjust the thermal conditions in their immediate environment to suit their personal comfort levels.
References: The LEED v4 reference guide for Interior Design and Construction details the need for individual thermal comfort controls in at least half of the occupant spaces to promote occupant comfort and well-being1. Additionally, resources like LEEDuser provide guidance on implementing these requirements in practice2.
NEW QUESTION # 66
A project consists of both retail and office space. When deciding which LEED Interior Design and Construction rating system to use, the LEED AP should follow which of the following rules?
- A. If a rating system is appropriate for 50% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable
- B. If a rating system is appropriate for more than 50% of the gross floor area of LEED project space, then that rating system should be used
- C. If a rating system is appropriate for less than 50% of the gross area of the LEED project space, then the rating system should not be used
- D. If a rating system is appropriate for 40% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable
Answer: B
Explanation:
When selecting a LEED Interior Design and Construction rating system, the LEED AP should use the rating system that is appropriate for the majority of the project's gross floorarea. If more than 50% of the project's area can be appropriately rated under a particular system, then that system should be applied to the entire project.
References:
* LEED v4: Interior Design + Construction Guide1
* LEED rating system selection guidance2.
When determining the most applicable LEED Interior Design and Construction rating system for a mixed-use project, such as one consisting of both retail and office space, the general guideline is to choose the rating system that is appropriate for the majority of the project's gross floor area. If a specific LEED rating system covers more than 50% of the project's gross floor area, it should be selected for the entire project. This approach ensures that the chosen rating system aligns closely with the predominant use of the project, facilitating a more relevant and effective sustainability strategy that addresses the primary functions and needs of the space.References:
* LEED v4 for Interior Design and Construction Reference Guide, particularly the sections outlining how to choose the appropriate rating system for mixed-use projects
NEW QUESTION # 67
A project team member has prepared a map and an accompanying table as documentation for Location and Transportation Credit, Surrounding Density and Diverse Uses, Option 2. Diverse Uses. The map includes the location of each use, the location of the project, and the main entrance of the building. The table includes the distance to each use, the name of each use, and the category of each use. The team lead reviews the documentation and notes an important missing item. Which of the following s the most important item to add to the documentation?
- A. The location of parking lots near each use
- B. Walking routes from the project to each use
- C. A calculation of the expected number of project occupants who will visit each use
- D. A description of each use
Answer: B
Explanation:
For the Location and Transportation Credit, Surrounding Density and Diverse Uses, Option 2, it is essential to document walking routes from the project to each use. This demonstrates the walkability and accessibility of the diverse uses from the project site, which is a key aspect of this credit.
References: The LEED reference guide for Interior Design and Construction emphasizes the importance of walkability and the need for projects to be located in areas with diverse uses and services within a walkable distance1. Additionally, the documentation requirements for this credit include maps and site analysis reports that detail the walking routes to surrounding amenities23.
NEW QUESTION # 68
A project team is pursuing certification for a performing arts center in an urban neighborhood. The project will earn one point from the Location and Transportation Credit, Surrounding Density and Diverse Uses. The project team is considering the Location and Transportation Credit for Reduced Parking Footprint. Which of the following needs to be included in the credit calculation?
- A. The project is located in an area without a code minimum and cannot meet this credit
- B. Existing parking spaces in a privately-owned parking deck being leased to the project staff that are 1/8 mi.
(0.40 km) away - C. Existing on-street parking spaces in the public right-of-way along the street in front of the project's main entrance
- D. A 20% reduction in the number of parking spaces from the calculated base ratio of the performing arts center
Answer: D
Explanation:
The LEED Location and Transportation Credit for Reduced Parking Footprint is aimed at projects that can demonstrate a reduction in parking capacity. For a performing arts center, this would involve showing a 20% reduction in the number of parking spaces compared to the base ratio typically required for such a facility.
This encourages the use of alternative transportation and reduces the environmental impact of excessive parking space.
References: The LEED v4.1 Reference Guide for Interior Design and Construction outlines the requirements for the Reduced Parking Footprint credit, which includes strategies like reducing parking capacity to minimize the project's impact on the environment1.
NEW QUESTION # 69
The project material costs for Building Product Disclosure and Optimization cost-based credits are
- A. default costs, 40% of total construction cost
- B. default costs, 30% of total construction cost
- C. actual costs, furniture included
- D. actual costs, furniture optional
Answer: D
Explanation:
The costs considered for Building Product Disclosure and Optimization (BPDO) cost-based credits should reflect the actual costs of the materials used in the project. Furniture is considered optional for these calculations. This approach allows for flexibility in reporting and aligns with the intent of the BPDO credits to encourage the use of sustainable materials.
References: The information is based on the guidelines provided by the U.S. Green Building Council for LEED v4 ID+C MR Credits Building Product Disclosure and Optimization1234.
NEW QUESTION # 70
In addition to the Material Type, what other information needs to be included in the Construction and Demolition Waste Management Calculation?
- A. Waste stream, total waste, diverted waste, waste to landfill
- B. Percentage of alternative daily cover (ADC) produced by the sorting facility, total of donated items, total of wood recycled, total of wood reused
- C. Donated waste, landfill waste, percentage of cardboard with recycled content, diverted waste
- D. Waste volume, commingled waste, wood for energy, reused items
Answer: A
Explanation:
The Construction and Demolition Waste Management Calculation requires information about the waste stream (the different types of materials being disposed of), the total amount of waste generated, the amount of waste diverted from landfill through recycling or reuse, and the amount of waste that is actually sent to the landfill.
References: This information aligns with the LEED AP Interior Design + Construction (LEED AP ID+C) V4 guidelines, which emphasize the importance of waste management planning in sustainable building practices1.
NEW QUESTION # 71
After the construction and installation of all finishes and furnishing of a new 36,000 ft2 (3 344.5m2) office space, what is the minimum total volume of outdoor air that is required during a non-phased flush-out procedure to achieve Indoor Environmental Quality Credit, Indoor Air Quality Assessment?
- A. 126,000,000 ft3 (3 567 922.7 m3)
- B. 504,000,000 ft3 (14 271 690.7 m3)
- C. 378,000,000 ft3 (10 703 768.1 m3)
- D. 522,000,000 ft3 (14 781 394.0 m3)
Answer: B
Explanation:
The LEED requirement for Indoor Environmental Quality Credit, Indoor Air Quality Assessment, specifies that after construction, a non-phased flush-out must supply a total air volume of14,000 cubic feet of outdoor air per square foot of floor area1. For a new office space of 36,000 ft², the calculation would be:
36,000 ft2×14,000 ft3/ft2=504,000,000 ft3
This aligns with option C, which is the correct answer.
References:
* LEED v4: Interior Design + Construction Guide2.
* Understanding LEED IAQ Testing Requirements1.
NEW QUESTION # 72
A project has access to two alternative water sources. How should they determine which source to use where?
- A. Match uses by location: indoor sources to indoor uses, outdoor sources to outdoor uses
- B. Target the uses that require the least treatment first, such as toilet flushing or irrigation
- C. A project may not use two alternative water sources
- D. All sources should be treated to potable water standards and used to supplement the municipal supply
Answer: B
Explanation:
When a project has access to two alternative water sources, the strategy is to use the source that requires the least amount of treatment for applications where water quality is less critical. This approach is efficient and sustainable as it reduces the need for extensive treatment processes. For instance, using untreated rainwater for irrigation or treated greywater for toilet flushing makes practical and environmental sense1.
References:
* LEED v4: Interior Design + Construction Guide2
* LEED v4 water efficiency credits and standards3
NEW QUESTION # 73
The contractor has submitted waste hauling reports for review in order to achieve Materials and Resources Credit, Construction and Demolition Waste Management. Which of the following by-products on the documentation contribute toward the credit?
- A. Fine waste used as Alternate Daily Cover
- B. Items sent to the local incinerator
- C. Wood derived fuel
- D. Excavated soil
Answer: C
Explanation:
Wood derived fuel contributes toward the Materials and Resources Credit, Construction and Demolition Waste Management, as it is considered a form of waste diversion. Diverting wood waste to be used as fuel is a recognized strategy for reducing the amount of waste sent to landfills and incinerators, aligning with the goals of sustainable waste management practices outlined in LEED1.
References:
* LEED v4 for Interior Design and Construction Reference Guide2.
* LEED Credit Library - Materials and Resources3.
* Canada Green Building Council's insight on Construction and Demolition Waste Management1.
NEW QUESTION # 74
A 1,500 ft2 (139 m2) mobile home is built in the downtown area of a major city. 90% of the project's gross floor will be completed by the time of occupancy. LEED certification is being sought. Which rating system would be the most appropriate one to use?
- A. LEED Interior Design and Construction
- B. LEED for Homes
- C. No rating system
- D. LEED Building Design and Construction
Answer: B
Explanation:
The most appropriate LEED rating system for a mobile home is LEED for Homes. This rating system is designed for residential projects and is suitable for a mobile home located in a downtown area of a major city.
Since the project is a home and not a commercial or public building, the LEED for Homes rating system would provide the best fit for certification.
References: The LEED for Homes rating system is outlined as suitable for residential projects, including homes like the one described, in the resources provided by the U.S. Green Building Council12.
NEW QUESTION # 75
Which of the following must be considered in order to meet Energy and Atmosphere Prerequisite, Fundamental Refrigerant Management if the tenant requires 24-hour cooling in a server room?
- A. Base-building chiller specifications
- B. Temperature monitoring of building cooling water
- C. CFC-free refrigerants in tenant cooling units
- D. ENERGY STAR compliant cooling units with low CFCs
Answer: C
NEW QUESTION # 76
......
Earn Quick And Easy Success With LEED-AP-ID-C Dumps: https://dumpscertify.torrentexam.com/LEED-AP-ID-C-exam-latest-torrent.html
