Prepare 350-701 Question Answers Free Update With 100% Exam Passing Guarantee [2024]
Dumps Real Cisco 350-701 Exam Questions [Updated 2024]
Cisco 350-701 is a certification exam that measures the knowledge and skills of candidates in implementing and operating core security technologies. 350-701 exam is part of the Cisco Certified Network Professional (CCNP) Security certification track and is designed for security professionals who are responsible for implementing and maintaining Cisco security solutions in enterprise environments. Implementing and Operating Cisco Security Core Technologies certification exam validates the candidate's knowledge and skills in areas such as network security, secure access, cloud security, endpoint protection, and secure network infrastructure.
Cisco 350-701 certification exam covers a broad range of topics, including network security, cloud security, content security, endpoint protection and detection, secure network access, visibility and enforcement, and security automation. These topics are essential for security professionals to ensure the security of their networks and devices and mitigate the risk of cyber-attacks.
NEW QUESTION # 164
A Cisco ESA administrator has been tasked with configuring the Cisco ESA to ensure there are no viruses before quarantined emails are delivered. In addition, delivery of mail from known bad mail servers must be prevented. Which two actions must be taken in order to meet these requirements? (Choose two)
- A. Scan quarantined emails using AntiVirus signatures
- B. Deploy the Cisco ESA in the DMZ
- C. Use outbreak filters from SenderBase
- D. Enable a message tracking service
- E. Configure a recipient access table
Answer: A,C
Explanation:
Explanation Explanation We should scan emails using AntiVirus signatures to make sure there are no viruses attached in emails. Note: A virus signature is the fingerprint of a virus. It is a set of unique data, or bits of code, that allow it to be identified. Antivirus software uses a virus signature to find a virus in a computer file system, allowing to detect, quarantine, and remove the virus. SenderBase is an email reputation service designed to help email administrators research senders, identify legitimate sources of email, and block spammers. When the Cisco ESA receives messages from known or highly reputable senders, it delivers them directly to the end user without any content scanning. However, when the Cisco ESA receives email messages from unknown or less reputable senders, it performs antispam and antivirus scanning. Reference: https://www.cisco.com/c/en/us/td/docs/security/esa/esa12-0/user_guide/ b_ESA_Admin_Guide_12_0/b_ESA_Admin_Guide_12_0_chapter_0100100.html -> Therefore Outbreak filters can be used to block emails from bad mail servers. Web servers and email gateways are generally located in the DMZ so Note: The recipient access table (RAT), not to be confused with remote-access Trojan (also RAT), is a Cisco ESA term that defines which recipients are accepted by a public listener.
Explanation
We should scan emails using AntiVirus signatures to make sure there are no viruses attached in emails.
Note: A virus signature is the fingerprint of a virus. It is a set of unique data, or bits of code, that allow it to be identified. Antivirus software uses a virus signature to find a virus in a computer file system, allowing to detect, quarantine, and remove the virus.
SenderBase is an email reputation service designed to help email administrators research senders, identify legitimate sources of email, and block spammers. When the Cisco ESA receives messages from known or highly reputable senders, it delivers them directly to the end user without any content scanning. However, when the Cisco ESA receives email messages from unknown or less reputable senders, it performs antispam and antivirus scanning.
Reference:
b_ESA_Admin_Guide_12_0/b_ESA_Admin_Guide_12_0_chapter_0100100.html
-> Therefore Outbreak filters can be used to block emails from bad mail servers.
Web servers and email gateways are generally located in the DMZ so
Explanation Explanation We should scan emails using AntiVirus signatures to make sure there are no viruses attached in emails. Note: A virus signature is the fingerprint of a virus. It is a set of unique data, or bits of code, that allow it to be identified. Antivirus software uses a virus signature to find a virus in a computer file system, allowing to detect, quarantine, and remove the virus. SenderBase is an email reputation service designed to help email administrators research senders, identify legitimate sources of email, and block spammers. When the Cisco ESA receives messages from known or highly reputable senders, it delivers them directly to the end user without any content scanning. However, when the Cisco ESA receives email messages from unknown or less reputable senders, it performs antispam and antivirus scanning. Reference: https://www.cisco.com/c/en/us/td/docs/security/esa/esa12-0/user_guide/ b_ESA_Admin_Guide_12_0/b_ESA_Admin_Guide_12_0_chapter_0100100.html -> Therefore Outbreak filters can be used to block emails from bad mail servers. Web servers and email gateways are generally located in the DMZ so Note: The recipient access table (RAT), not to be confused with remote-access Trojan (also RAT), is a Cisco ESA term that defines which recipients are accepted by a public listener.
NEW QUESTION # 165
What is a characteristic of a bridge group in ASA Firewall transparent mode?
- A. It includes multiple interfaces and access rules between interfaces are customizable
- B. It is a Layer 3 segment and includes one port and customizable access rules
- C. It has an IP address on its BVI interface and is used for management traffic
- D. It allows ARP traffic with a single access rule
Answer: A
Explanation:
A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place.
Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported.
You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired.
A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place.
Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported.
You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired.
A bridge group is a group of interfaces that the ASA bridges instead of routes. Bridge groups are only supported in Transparent Firewall Mode. Like any other firewall interfaces, access control between interfaces is controlled, and all of the usual firewall checks are in place.
Each bridge group includes a Bridge Virtual Interface (BVI). The ASA uses the BVI IP address as the source address for packets originating from the bridge group. The BVI IP address must be on the same subnet as the bridge group member interfaces. The BVI does not support traffic on secondary networks; only traffic on the same network as the BVI IP address is supported.
You can include multiple interfaces per bridge group. If you use more than 2 interfaces per bridge group, you can control communication between multiple segments on the same network, and not just between inside and outside. For example, if you have three inside segments that you do not want to communicate with each other, you can put each segment on a separate interface, and only allow them to communicate with the outside interface. Or you can customize the access rules between interfaces to allow only as much access as desired.
Reference:
Note: BVI interface is not used for management purpose. But we can add a separate Management slot/port interface that is not part of any bridge group, and that allows only management traffic to the ASA.
Note: BVI interface is not used for management purpose. But we can add a separate Management slot/port interface that is not part of any bridge group, and that allows only management traffic to the ASA.
NEW QUESTION # 166
Which risk is created when using an Internet browser to access cloud-based service?
- A. intermittent connection to the cloud connectors
- B. insecure implementation of API
- C. vulnerabilities within protocol
- D. misconfiguration of Infra, which allows unauthorized access
Answer: B
NEW QUESTION # 167
What is the purpose of joining Cisco WSAs to an appliance group?
- A. It simplifies the task of patching multiple appliances.
- B. All WSAs in the group can view file analysis results.
- C. The group supports improved redundancy
- D. It supports cluster operations to expedite the malware analysis process.
Answer: C
NEW QUESTION # 168
A network administrator is using the Cisco ESA with AMP to upload files to the cloud for analysis. The network is congested and is affecting communication. How will the Cisco ESA handle any files which need analysis?
- A. The file upload is abandoned.
- B. AMP calculates the SHA-256 fingerprint, caches it, and periodically attempts the upload.
- C. The file is queued for upload when connectivity is restored.
- D. The ESA immediately makes another attempt to upload the file.
Answer: A
Explanation:
The appliance will try once to upload the file; if upload is not successful, for example because of connectivity problems, the file may not be uploaded. If the failure was because the file analysis server was overloaded, the upload will be attempted once more.
Reference:
In this question, it stated "the network is congested" (not the file analysis server was overloaded) so the appliance will not try to upload the file again.
NEW QUESTION # 169
What is an advantage of the Cisco Umbrella roaming client?
- A. visibility into IP-based threats by tunneling suspicious IP connections
- B. the ability to dynamically categorize traffic to previously uncategorized sites
- C. the ability to see all traffic without requiring TLS decryption
- D. visibility into traffic that is destined to sites within the office environment
Answer: B
NEW QUESTION # 170
A network administrator is configuring a switch to use Cisco ISE for 802.1X. An endpoint is failing authentication and is unable to access the network. Where should the administrator begin troubleshooting to verify the authentication details?
- A. Adaptive Network Control Policy List
- B. Context Visibility
- C. RADIUS Live Logs
- D. Accounting Reports
Answer: C
Explanation:
How To Troubleshoot ISE Failed Authentications & Authorizations
Check the ISE Live Logs
Login to the primary ISE Policy Administration Node (PAN).
Go to Operations > RADIUS > Live Logs
(Optional) If the event is not present in the RADIUS Live Logs, go to Operations > Reports > Reports > Endpoints and Users > RADIUS Authentications Check for Any Failed Authentication Attempts in the Log
NEW QUESTION # 171
Drag and drop the cryptographic algorithms for IPsec from the left onto the cryptographic processes on the right.
Answer:
Explanation:
NEW QUESTION # 172
Which attack is preventable by Cisco ESA but not by the Cisco WSA?
- A. phishing
- B. SQL injection
- C. DoS
- D. buffer overflow
Answer: A
Explanation:
The following are the benefits of deploying Cisco Advanced Phishing Protection on the Cisco Email Security Gateway:
Prevents the following:
+ Attacks that use compromised accounts and social engineering.
+ Phishing, ransomware, zero-day attacks and spoofing.
+ BEC with no malicious payload or URL.
The following are the benefits of deploying Cisco Advanced Phishing Protection on the Cisco Email Security Gateway:
Prevents the following:
+ Attacks that use compromised accounts and social engineering.
+ Phishing, ransomware, zero-day attacks and spoofing.
+ BEC with no malicious payload or URL.
The following are the benefits of deploying Cisco Advanced Phishing Protection on the Cisco Email Security Gateway:
Prevents the following:
+ Attacks that use compromised accounts and social engineering.
+ Phishing, ransomware, zero-day attacks and spoofing.
+ BEC with no malicious payload or URL.
Reference:
5/m_advanced_phishing_protection.html
5/m_advanced_phishing_protection.html
NEW QUESTION # 173
A Cisco ISE engineer configures Central Web Authentication (CWA) for wireless guest access and must have the guest endpoints redirect to the guest portal for authentication and authorization. While testing the policy, the engineer notices that the device is not redirected and instead gets full guest access. What must be done for the redirect to work?
- A. Create an advanced attribute setting of Cisco:cisco-gateway-id=guest within the authorization profile for the authorization policy line that the unauthenticated devices hit.
- B. Use the track movement option within the authorization profile for the authorization policy line that the unauthenticated devices hit.
- C. Add the DACL name for the Airespace ACL configured on the WLC in the Common Tasks section of the authorization profile for the authorization policy line that the unauthenticated devices hit.
- D. Tag the guest portal in the CWA part of the Common Tasks section of the authorization profile for the authorization policy line that the unauthenticated devices hit.
Answer: C
NEW QUESTION # 174
Which solution is made from a collection of secure development practices and guidelines that developers must follow to build secure applications?
- A. OWASP
- B. AFL
- C. Fuzzing Framework
- D. Radamsa
Answer: A
NEW QUESTION # 175
Refer to the exhibit.
Which command was used to display this output?
- A. show dot1x
- B. show dot1x all summary
- C. show dot1x all
- D. show dot1x interface gi1/0/12
Answer: C
NEW QUESTION # 176
Drag and drop the suspicious patterns for the Cisco Tetration platform from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 177
Which attack is preventable by Cisco ESA but not by the Cisco WSA?
- A. phishing
- B. SQL injection
- C. DoS
- D. buffer overflow
Answer: A
NEW QUESTION # 178
What are two differences between a Cisco WSA that is running in transparent mode and one running in explicit mode? (Choose two.)
- A. The Cisco WSA uses a Layer 3 device to redirect traffic only if it is running in transparent mode.
- B. When the Cisco WSA is running in transparent mode, it uses the WSA's own IP address as the HTTP request destination.
- C. The Cisco WSA responds with its own IP address only if it is running in explicit mode.
- D. The Cisco WSA responds with its own IP address only if it is running in transparent mode.
- E. The Cisco WSA is configured in a web browser only if it is running in transparent mode.
Answer: A,C
NEW QUESTION # 179
Drag and drop the common security threats from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 180
Which network monitoring solution uses streams and pushes operational data to provide a near real-time view of activity?
- A. model-driven telemetry
- B. SNMP
- C. syslog
- D. SMTP
Answer: A
Explanation:
Explanation/Reference: https://developer.cisco.com/docs/ios-xe/#!streaming-telemetry-quick-start-guide
NEW QUESTION # 181
Refer to the exhibit. When creating an access rule for URL filtering, a network engineer adds certain categories and individual URLs to block. What is the result of the configuration?
- A. Only URLs for botnets with reputation scores of 3-5 will be blocked.
- B. Only URLs for botnets with reputation scores of 1-3 will be blocked.
- C. Only URLs for botnets with a reputation score of 3 will be allowed while the rest will be blocked.
- D. Only URLs for botnets with a reputation score of 3 will be blocked.
Answer: B
NEW QUESTION # 182
Which two solutions help combat social engineering and phishing at the endpoint level? (Choose two.)
- A. Cisco Duo Security
- B. Cisco TrustSec
- C. Cisco DNA Center
- D. Cisco ISE
- E. Cisco Umbrella
Answer: A,E
NEW QUESTION # 183
......
350-701 Exam Dumps, 350-701 Practice Test Questions: https://dumpscertify.torrentexam.com/350-701-exam-latest-torrent.html
