Free 5V0-22.23 Exam Files Downloaded Instantly UPDATED [2024]
100% Pass Guaranteed Free 5V0-22.23 Exam Dumps
VMware vSAN Specialist (v2) certification exam consists of 60 multiple-choice questions that need to be answered within 105 minutes. 5V0-22.23 exam covers various topics such as vSAN architecture, design, installation, configuration, and management. 5V0-22.23 exam also covers topics such as vSAN policies, fault tolerance, scaling, and monitoring. Candidates who pass the exam will be recognized as VMware Certified Professionals and will receive a digital badge that they can share on their social media profiles.
NEW QUESTION # 39
A vSAN administrator has an existing cluster where each ESXi host has the following:
Disk group #1 with one cache device and three capacity devices.
Disk group #2 with one cache device and two capacity devices.
What must the vSAN administrator do to expand disk group #2 to have three capacity devices?
- A. Create a new disk group with a single capacity device and then migrate the existing capacity devices
- B. Put the entire ESXi host in maintenance mode, evacuate all data, then add the new capacity device
- C. Add the new capacity device to the disk group and vSAN will automatically rebalance
- D. Put the disk group in maintenance mode, evacuate all data, then add the new capacity device
Answer: C
Explanation:
Explanation
To expand disk group #2 to have three capacity devices, the vSAN administrator should add the new capacity device to the disk group and vSAN will automatically rebalance. This action allows the administrator to increase the storage capacity of the disk group without disrupting any ongoing operations or evacuating any data. vSAN will automatically distribute data across all devices in the disk group to balance performance and utilization. The other options are not correct. Creating a new disk group with a single capacity device and then migrating the existing capacity devices is not necessary, as it would require more steps and resources than adding a device to an existing disk group. Putting the entire ESXi host or the disk group in maintenance mode and evacuating all data is not required, as it would cause downtime and data movement that could be avoided by adding a device to an existing disk group. References: Add Devices to the Disk Group; Expanding a vSAN Cluster
NEW QUESTION # 40
A customer has deployed a new vSAN Cluster with the following configuration:
* 6 x vSAN ReadyNodes
* All Flash
* 12 TB Raw Storage
* vSAN 8 is deployed with ESA.
VMs are configured with a RAID-5 VM policy.
During failure testing, before the new platform is placed into production one of the ESXi hosts is made unavailable.
Which RAID-5 data placement schemes will vSAN use with this failure condition?
- A. VMware HA will migrate the storage objects to another node in the cluster
- B. vSAN can protect the platform using adaptive RAID 5 if the ESXi host fails to return
- C. The data components on the hosts will be marked as degraded
- D. Some VM data will be unavailable until the failed ESXi host is recovered
Answer: C
Explanation:
Explanation
When a host in a vSAN stretched cluster goes offline, the data components on the hosts will be marked as degraded. This means that the data is still available, but the redundancy level is reduced. vSAN will try to rebuild the missing components on another host in the same fault domain, if there is enough capacity and resources. If the host comes back online within 60 minutes, vSAN will resync the data and restore the redundancy level. If the host does not come back online within 60 minutes, vSAN will rebuild the missing components on another fault domain, if there is enough capacity and resources. This will incur additional network traffic across the witness link. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 17
NEW QUESTION # 41
An architect is designing a vSAN stretched cluster and needs to ensure that data remains on a given site in case of a network partition between the sites.
Which configuration would do this?
- A. IvSoh ere High Availability
- B. Preferred and secondary sites
- C. Distributed Resource Scheduler
- D. vCenter High Availability
Answer: B
Explanation:
Explanation
In a vSAN stretched cluster configuration, both data sites are active sites, but one site must be designated as the preferred site and the other site as the secondary or nonpreferred site. This configuration helps to ensure that data remains on a given site in case of a network partition between the sites. If the network connection between the two active sites is lost, vSAN continues operation with the preferred site, unless it is resyncing or has another issue. The site that leads to maximum data availability is the one that remains in operation. The other options are not relevant to this scenario. References: Introduction to Stretched Clusters; vSAN Stretched Cluster Guide
NEW QUESTION # 42
The DevOps team of an organization wants to deploy with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.
Which two requirements must the administrator meet to complete this task? (Choose two.)
- A. Unclaimed disks in the hosts forvSAN Direct
- B. A dedicated network for vSAN Direct
- C. HA enabled on the vSAN cluster
- D. An integration with vSAN File Services
- E. A valid vSAN license for the vSAN cluster
Answer: A,E
Explanation:
Explanation
To configure vSAN Direct, the administrator must meet two requirements: a valid vSAN license for the vSAN cluster and unclaimed disks in the hosts for vSAN Direct. A vSAN license is required to enable vSAN features and services, including vSAN Direct. Unclaimed disks are local storage devices that are not used by vSAN or any other service, and can be claimed by vSAN Direct to create datastores for persistent storage. The other options are not requirements for vSAN Direct. HA is an optional feature that can be enabled on any cluster, but is not specific to vSAN Direct. A dedicated network for vSAN Direct is not necessary, as vSAN Direct uses the same network as vSAN. An integration with vSAN File Services is not required, as vSAN Direct does not provide file shares, but block storage. References: Set Up vSAN Direct for vSphere with Tanzu; vSAN Licensing Guide
NEW QUESTION # 43
An administrator is upgrading multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters.
What two witness node types can the administrator upgrade? (Choose two.)
- A. Shared witness node
- B. Dedicated witness node
- C. Appliance witness node
- D. Physical witness node
- E. Nested witness node
Answer: C,E
Explanation:
Explanation
To upgrade multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters, the administrator can upgrade two witness node types: appliance witness node and nested witness node. An appliance witness node is a virtual ESXi host that runs on a physical ESXi host and contains the witness components of VM objects stored in the vSAN cluster. A nested witness node is a virtual ESXi host that runs on another virtual ESXi host and contains the witness components of VM objects stored in the vSAN cluster. Both types of witness nodes can be managed by vLCM as independent nodes since vSphere 7.0 Update 3, as long as they are version 7.0 Update 2 or later. The other options are not correct. A shared witness node is a witness node that serves multiple vSAN clusters, which is not supported by vLCM. A dedicated witness node is a witness node that serves only one vSAN cluster, which is not a specific type of witness node. A physical witness node is aphysical ESXi host that contains the witness components of VM objects stored in the vSAN cluster, which cannot be upgraded by vLCM. References: vSphere Lifecycle Manager and the vSAN Witness Hosts; Shared Witness for 2-Node vSAN Deployments
NEW QUESTION # 44
An administrator wishes to prevent vCenter notifications of vSAN Health status during a scheduled maintenance window.
Which action can be taken to achieve this goal?
- A. Run performance diagnostics prior to scheduled maintenance
- B. Disable the performance service
- C. Disable SNMP service
- D. Disable the alarm from the HTML client
Answer: D
Explanation:
Explanation
To prevent vCenter notifications of vSAN Health status during a scheduled maintenance window, the administrator can disable the alarm from the HTML client. This will suppress the alerts for a specified duration or until the alarm is re-enabled. Disabling the performance service, running performance diagnostics, or disabling SNMP service will not affect the vSAN Health status notifications. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 25
NEW QUESTION # 45
A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.
What is the fastest approach?
- A. Launch Quickstart to Add Hosts to a vSAN Cluster
- B. Use a Host Profile that was extracted from an existing host
- C. Run vim-cmd to capture, and apply the configuration from an existing host
- D. Clone the ESXi boot partition to all new hosts, since the hardware is identical
Answer: B
Explanation:
Explanation
To add 30 additional vSAN ReadyNodes to an existing vSAN cluster with the fastest approach, the vSAN administrator should use a Host Profile that was extracted from an existing host. AHost Profile is a configuration template that captures the settings of a reference host and applies them to other hosts or clusters.
This way, the administrator can quickly and consistently configure multiple hosts with the same settings, such as network, storage, security, and services. The other options are not correct. Running vim-cmd to capture and apply the configuration from an existing host is not as fast or convenient as using a Host Profile, as it requires running commands on each host individually. Launching Quickstart to Add Hosts to a vSAN Cluster is not possible, as Quickstart is only available for new clusters or clusters that were configured through Quickstart.
Cloning the ESXi boot partition to all new hosts is not recommended, as it might cause conflicts or errors with the host identity, network settings, or licenses. References: Configuring Hosts Using Host Profile; Using Quickstart to Configure and Expand a vSAN Cluster
NEW QUESTION # 46
An administrator wants to assign a storage policy to a workload on a two-node vSAN OSA cluster consisting of three disk groups each with nested fault domains. The virtual machine must be protected against a disk or disk group failure.
Which two storage policies meet these requirements? (Choose two.)
- A. RAID-5/FTT 2
- B. RAID-5/FTT 1
- C. RAID-6/FTT 2
- D. RAID-1/FTT 1
- E. RAID-1/FTT 3
Answer: C,D
Explanation:
Explanation
To protect a virtual machine against a disk or disk group failure, the storage policy must have a failure tolerance method (FTM) of RAID-1 or RAID-6 and a failure to tolerate (FTT) value of at least 1. RAID-1 mirrors the data across multiple disk groups, while RAID-6 uses erasure coding to stripe the data and parity information across multiple disk groups. RAID-5 is not suitable for this scenario, as it can only tolerate one disk failure per stripe. FTT 2 or 3 would require more disk groups than available in the cluster.
Therefore, the correct options are C and E. References: 1, page 8; 2, section 3.1
NEW QUESTION # 47
A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.
A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?
- A. Make sure the vLCM image is configured to use the most recent version of the Vendor Add-on
- B. Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver
- C. Add an individual component to the vLCM image that has the updated NIC driver
- D. Remove theVendor Add-on from the vLCM image, and then manually install the network driver on the servers
Answer: C
Explanation:
Explanation
To ensure the latest network driver is installed on the NIC before remediation, the vSAN administrator should add an individual component to the vLCM image that has the updated NIC driver. This action allows the administrator to override the driver provided by the vendor add-on and use a newer version that is compatible with the ESXi version and the hardware device. The administrator can add an individual component to the vLCM image by importing it from a ZIP file or selecting it from the vLCM depot. The other options are not correct. Making sure the vLCM image is configured to use the most recent version of the vendor add-on will not help, as the required NIC driver is a newer version than the one provided by the vendor add-on. Removing the vendor add-on from the vLCM image or modifying the vLCM image to omit the NIC driver will not ensure the latest network driver is installed on the NIC, as these actions will leave the NIC without any driver update. Manually installing or updating the network driver on the servers is not recommended, as it might cause inconsistency and non-compliance in the vLCM image. References: vSphere Lifecycle Manager Image Components; [Add an Individual Component to an Image]
NEW QUESTION # 48
All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:
Failures to Tolerate (FTT) rule is set to "2 Failures - RAID-1 (Mirroring)" The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.
Which action should the vSAN administrator take to meet this goal?
- A. Add the "Flash read cache reservation" rule to the storage policy, and set to 0%
- B. Change the FTT rule to "1 Failure - RAID-1 (Mirroring)", and select "Now" for Reapply to VMs
- C. Modify the FTT rule to "2 Failures - RAID-5 (Erasure Coding)"
- D. Disable Operations reserve and Host rebuild reserve and click "Apply"
Answer: B
Explanation:
Explanation
To reduce the amount of vSAN datastore capacity the virtual machines will consume, the vSAN administrator should change the FTT rule to "1 Failure - RAID-1 (Mirroring)", and select "Now" for Reapply to VMs. This action will reduce the number of replicas for each object from three to two, and thus free up some space on the vSAN datastore. The other options are not correct, as they will not reduce the capacity consumption.
Modifying the FTT rule to "2 Failures - RAID-5 (Erasure Coding)" will not work for a hybrid vSAN cluster, as erasure coding is only supported for all-flash clusters. Adding the "Flash read cache reservation" rule to the storage policy, and setting to 0% will not affect the capacity layer, as it only controls the amount of flash cache reserved for each object. Disabling Operations reserve and Host rebuild reserve and clicking "Apply" will not change the actual space used by the objects, as these reserves are only logicalsettings that affect how much free space is reported by vSAN. References: 1, page 9; , section 4.3
NEW QUESTION # 49
An administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any virtual machines that are created are placed in the appropriate site.
Which two steps are needed to complete this task? (Choose two.)
- A. Create a single VM/Host group across both sites
- B. Create VM/Host groups for the two sites
- C. Create a storage policy that includes site affinity rules and apply to VMs
- D. Put the VMs in a vSphere DRS group
- E. Put the VMs in the correct VM group
Answer: B,C
Explanation:
Explanation
To ensure that any virtual machines that are created are placed in the appropriate site, the administrator needs to create VM/Host groups for the two sites and create a storage policy that includes site affinity rules and apply to VMs. VM/Host groups allow the administrator to group virtual machines and hosts based on their location or preference. Site affinity rules specify which site a virtual machine should be placed on or prefer to run on. A single VM/Host group across both sites would not allow the administrator to control the placement of virtual machines. Putting the VMs in a vSphere DRS group or in the correct VM group would not affect their site affinity. References: 1, page 12; 2, section 3.2
NEW QUESTION # 50
An administrator must choose between deploying a virtual witness or a physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.
What is a benefit of selecting this approach?
- A. Shared metadata between separate clusters
- B. Additional compute capacity for running VMs
- C. Reduced vSphere licensing
- D. Increased vSAN datastore capacity
Answer: C
Explanation:
Explanation
The correct answer is C, reduced vSphere licensing. This is because using a virtual witness appliance instead of a physical witness host can save on vSphere licensing costs, as the virtual witness appliance does not consume a vSphere license. The virtual witness appliance is a preconfigured virtual machine that runs ESXi and is distributed as an OVA file. It can be deployed on any ESXi host that has network connectivity to both data sites of the stretched cluster. The virtual witness appliance does not run any virtual machines other than itself and only hosts witness components of virtual machine objects. The other options are incorrect for the following reasons:
A, increased vSAN datastore capacity, is incorrect because using a virtual witness appliance does not affect the vSAN datastore capacity. The witness appliance does not store any customer data, only metadata, such as the size and UUID of vSAN object and components. The witness appliance also does not contribute any storage devices to the vSAN datastore.
B, shared metadata between separate clusters, is incorrect because using a virtual witness appliance does not enable sharing metadata between separate clusters. The witness appliance is dedicated to one stretched cluster and cannot serve as a witness for multiple clusters. The witness appliance maintains consistency between the two data sites of the stretched cluster by hosting witness components that act as tie-breakers in case of a site failure or network partition.
D, additional compute capacity for running VMs, is incorrect because using a virtual witness appliance does not provide additional compute capacity for running VMs. The witness appliance does not run any VMs other than itself and does not participate in any compute operations of the stretched cluster. The witness appliance only hosts witness components that consume minimal CPU and memory resources.
References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 11
Deploying a vSAN Witness Appliance
NEW QUESTION # 51
An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized.
What has to be done and configured to achieve this goal?
- A. Distribute servers across at least three different racks and configure three fault domains
- B. Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks
- C. Enable deduplication and compression
- D. Distribute servers across at least two different racks and configure two fault domains
Answer: A
Explanation:
Explanation
To ensure that a single rack failure is not going to affect the data availability, while minimizing the number of racks used, the administrator has to do the following:
Distribute servers across at least three different racks. This is because vSAN supports up to three fault domains per cluster, which can be used to tolerate one or two failures. If only two racks are used, then only one failure can be tolerated4 Configure three fault domains. A fault domain is a logical grouping of hosts that share a common failure point, such as a rack or a power supply. By configuring fault domains, vSAN can place replicas of an object across different fault domains, so that a failure within one fault domain does not result in data loss orunavailability4 References: 4: VMware vSAN Specialist v2 Exam Preparation Guide, page 13
NEW QUESTION # 52
A host in a vSAN stretched cluster goes offline during an unplanned event.
Which action will be triggered from AQC on the vSAN cluster?
- A. AQC will recalculate the quorum on an object.
- B. AQC will restart the VMs that went offline.
- C. AQC will trigger a vMotion of VMs that went offline.
- D. AQC will create a vSAN alarm.
Answer: A
Explanation:
Explanation
When a host in a vSAN stretched cluster goes offline, vSAN will use Adaptive Resync to recalculate the quorum on an object. Quorum is the minimum number of votes that an object needs to be available. For example, a RAID-1 object with two data components and one witness component needs two votes out of three to be available. If one data component goes offline, the object still has quorum and is available. However, if both data components go offline, the object loses quorum and is unavailable. Adaptive Resync will adjust the quorum requirement based on the availability of components and fault domains. For example, if one fault domain goes offline, Adaptive Resync will lower the quorum requirement to one vote out of two, so that the object can remain available with one data component and one witness component. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 18
NEW QUESTION # 53
Refer to the exhibit.
An administrator uses SSH to log into a vSAN ESA host and runs theesxcli vsan debug object overview command.
The administrator notices the Healthy Components column, the last column, is reporting some components are not in a fully healthy state.
What could cause this behavior?
- A. New VMDKs have been added to multiple VMs, but the storage policy has not finished applying.
- B. The applied Storage policy has been updated.
- C. One host is in maintenance mode with ensure accessibility.
- D. New physical disks have been claimed and a rebalance operation is underway.
Answer: C
Explanation:
Explanation
The most likely cause for some components to be not in a fully healthy state is that one host is in maintenance mode with the ensure accessibility option. This option creates temporary durability components on other hosts to maintain the required number of failures to tolerate (FTT) until the original components are restored or rebuilt. These durability components are not considered fully healthy because they do not have full redundancy and might not be compliant with the storage policy. The other options do not explain why some components are not fully healthy, as they do not affect the FTT or the compliance state of the objects.
References: Durability Components; esxcli vsan debug object overview
NEW QUESTION # 54
A customer wants to validate if Skyline online health is working for vSAN and finds out that Skyline is not fully configured yet.
What two requirements must be met to make sure that Skyline online health will work? (Choose two.)
- A. Have vCenter on version 7 or higher
- B. Enable CEIP and join the program
- C. Enable Skyline Health on the vSAN Cluster
- D. Add the Skyline license into Virtual Center
- E. Have a working Internet connection
Answer: B,E
Explanation:
Explanation
To make sure that Skyline online health will work for vSAN, two requirements must be met: enable CEIP and join the program, and have a working Internet connection. CEIP stands for Customer Experience Improvement Program, which is a voluntary program that collects anonymous product usage data from customers who participate in it. By enabling CEIP and joining the program, customers can benefit from Skyline online health, which provides proactivenotifications and recommendations for software and hardware issues based on VMware Analytics Cloud. A working Internet connection is also required for Skyline online health to communicate with VMware Analytics Cloud and receive online notifications. The other options are not requirements for Skyline online health. References: About the vSAN Skyline Health; Skyline Health
NEW QUESTION # 55
After reviewing various performance charts at a cluster level, an administrator found an individual VM impacting overall performance of the vSAN cluster.
What feature should be used to introspect multiple performance metrics of a single virtual machine?
- A. llOlnsiqht
- B. Skyline Health
- C. I/O Trip Analyzer
- D. esxci
Answer: C
Explanation:
Explanation
To introspect multiple performance metrics of a single virtual machine, such as latency, throughput, IOPS, and congestion, the feature that should be used is I/O Trip Analyzer. This feature allows the administrator to diagnose the virtual machine I/O latency issues by providing a breakdown of the latencies at each layer of the vSAN stack, such as VM, host, network, and disk group. The other options are not correct, as they do not provide multiple performance metrics of a single virtual machine. esxcli is a command-line tool that can be used to manage various aspects of ESXi hosts, but it does not provide detailed performance analysis of virtual machines. Skyline Health is a feature that provides proactive notifications and recommendations for software and hardware issues based on VMware Analytics Cloud, but it does not provide granular performance metrics of virtual machines. llOlnsiqht is not a valid feature name in vSAN. References: Use I/O Trip Analyzer; Monitoring vSAN Performance
NEW QUESTION # 56
When adding a disk to a host that was previously used in a decommissioned vSAN cluster the intended disk does not show among the available devices in disk management.
Which action should be taken prior to assigning the disk on disk management?
- A. Format the existing partition
- B. Create a 1GB metadata partition
- C. Create a VMFS partition
- D. Delete all device partitions
Answer: D
Explanation:
Explanation
When adding a disk to a host that was previously used in a decommissioned vSAN cluster, the disk may still have some vSAN metadata partitions that prevent it from being recognized by disk management. To resolve this issue, the disk partitions need to be deleted using either ESXCLI or partedUtil commands. This will erase all data on the disk and make it available for use in disk management. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 21
NEW QUESTION # 57
vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one storage policy, but the administrator did not explicitly assign a storage policy when provisioning the new VM.
What is the result of this situation?
- A. The VM objects will be protected based on the vSAN Default Storage Policy configurations.
- B. The VM provisioning will fail.
- C. The vSphere Web Client will choose the last vSAN Storage Policy used.
- D. No data protection will be applied to the VM objects.
Answer: A
Explanation:
Explanation
If the administrator did not explicitly assign a storage policy when provisioning a new VM on a vSAN datastore, the result is that the VM objects will be protected based on the vSAN Default Storage Policy configurations. The vSAN Default Storage Policy is assigned to all VM objects if no other vSAN policy is assigned when provisioning a VM. The default policy contains vSAN rule sets and a set of basic storage capabilities, such as Failures to tolerate set to 1, Number of disk stripes per object set to 1, and Thin provisioning. The other options are not correct. The VM provisioning will not fail, as vSAN requires that every VM has at least one storage policy. The vSphere Web Client will not choose the last vSAN Storage Policy used, as it will always apply the default policy if no other policy is selected. No data protection will not be applied to the VM objects, as they will have at least one replica based on the default policy.
References: About the vSAN Default Storage Policy; Using vSAN Policies
NEW QUESTION # 58
A customer wishes to host a new range of applications with high-performance requirements, specifically, low latency. The current vSAN platform is based on ReadyNode hardware and uses a vSAN 7.0 U2 hybrid topology configuration.
Which would satisfy the customer's requirement?
- A. Deploy the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration
- B. Perform an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA
- C. Deploy the application on a new cluster with vSAN 8.0 ESA using a new hardware design
- D. Deploy the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4
Answer: C
Explanation:
Explanation
Deploying the application on a new cluster with vSAN 8.0 ESA using a new hardware design is the correct answer because it will satisfy the customer's requirement for low latency. vSAN 8.0 ESA is a new architecture that uses a storage pool configuration where all disks are treated as capacity disks and use a new algorithm to distribute data across them. This improves the I/O flow, reduces the write amplification, and eliminates the cache tier bottleneck. Using a new hardware design with all-flash disks or NVMe disks will further enhance the performance and latency of the application, as these disks have faster read and write speeds than hybrid disks. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additionalstripe width of 4, deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration, and performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA are not valid or optimal solutions for this scenario. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4 will increase the resiliency and availability of the data, but it will also increase the network traffic, disk space consumption, and parity calculation overhead, which will negatively affect the latency and performance of the application. Deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration will not improve the latency significantly, as vSAN 8.0 OSA still uses the same disk group configuration as vSAN 7.0 U2 OSA, where one disk is designated as a cache disk and the rest are capacity disks. The cache disk can still become a bottleneck for high-performance applications, especially if it is not an SSD or NVMe disk. Performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA is not possible, as vSAN ESA requires a different hardware design than vSAN OSA. The existing disk groups need to be deleted and all disks need to be erased before switching to vSAN ESA. References:
[VMware vSAN Specialist v2 Exam Preparation Guide], page 6
What's New in VMware vSAN 8.0
NEW QUESTION # 59
......
VMware 5V0-22.23 certification exam is suitable for a wide range of IT professionals, including system administrators, architects, engineers, consultants, and support staff. VMware vSAN Specialist (v2) certification is particularly relevant for those who work with virtualized environments and want to specialize in VMware vSAN technology. It can help IT professionals enhance their career prospects, increase their earning potential, and gain recognition from their peers and employers.
VMware vSAN Specialist (v2) certification is a great way to demonstrate your expertise in VMware vSAN technology to potential employers. VMware vSAN Specialist (v2) certification is recognized globally and is highly valued by organizations that use VMware technology. It is an excellent way to enhance your resume and advance your career.
Latest 5V0-22.23 dumps - Instant Download PDF: https://dumpscertify.torrentexam.com/5V0-22.23-exam-latest-torrent.html
